Skip to content. | Skip to navigation

Personal tools

Sections

Switch-ComPass Bs 2.0

The new ComPass with control function and freely programmable logic

Directional Short-Circuit and Directional Earth Fault Indicator with monitoring and control function

Product Features

  • For remote controlling of a load-break switch or circuit-breaker
  • Free assignment of 6 binary inputs for the collection and transmission of relevant switchgear/station data
  • Freely programmable logic for flexible definition of switchgear conditions
  • Directional short-circuit and directional earth fault indicator
  • Clear fault indication and reading on-site: 2 directional arrow LEDs (A, B) and high contrast OLED display
  • Monitoring of the parameters voltage (V), current (I), load flow
    direction (B↓ or A↑), power factor (cos φ), power (P, Q, S), energy (E), tem-perature (T) and frequency (f)
  • Suitable for all types of networks/neutral point treatments
  • Earth fault detection with 6 different earth fault detection methods, also in combination
  • High-precision current and voltage measurement to 0.5 %
  • Voltage monitoring with connection to capacitive and resistive (ohmic) sensors in one indicator
  • PT-100 temperature sensor for equipment monitoring
  • Limit monitoring: V, I, P, Q, T
  • ComPass Explorer Software: Commissioning and parametrisation via front accessible USB port

The Control ComPass Bs 2.0 is suitable for use in substations with a remote control connection of the electrical power distribution in a medium voltage network. In addition to the short-circuit and earth fault function,  ComPass B 2.0 supplies the collected measured values of current, voltage and power from the station for transmission to the control room. The PT100 sensor measures the temperature, for example of the transformer or the transformer station. For all measured values limits can be defined, which can also be transmitted to the control room.
The voltage coupling/measurement is done via the capacitive VDS system or via resistive (ohmic) voltage sensors. Up to four ComPass can be connected to one set of resistive voltage sensors.
In addition to the functions of the ComPass B 2.0, the Control ComPass Bs 2.0 offers a control function for switching a load-break switch or circuit-breaker. A free assignment of 6 binary inputs in combination with a freely programmable logic (PLC functionality) enables the user to define the switching conditions in a flexible manner. Random information, such as the SF6 gas disruption or HV tripped fuse, can be captured via the binary inputs.

Equipment set:

1 Display unit
3 single-phase current sensors
or 2 single and 1 summation current sensor

Product Video



Product

Note Item Number

Display unit

Item Number38-4153-001


Accessories

WEGA 1.2 C

WEGA 1.2 C

base type without C2

more...
51-1250-001

WEGA 2.2 C

WEGA 2.2 C

more...
51-2250-001

WEGA 1.2 C vario

WEGA 1.2 C vario

more...
51-1300-001

Current Sensors

Short-circuit Current Sensor

  • Split-core cable-type current sensor
  • for retrofit on insulated cables
  • for short-circuit indicator types: SIGMA and ComPass
  • for conductor 15 – 55 mm Ø
  • cable length 3 m

more...
49-6024-001
Short-circuit Current Sensor

  • Split-core cable-type current sensor
  • for retrofit on insulated cables
  • for short-circuit indicator types: SIGMA and ComPass
  • for conductor 15 – 65 mm Ø
  • cable length 3 m

more...
49-6024-010
Single-phase Current Sensor

  • for new installation on bushings
  • for switchgear manufacturer
    • ABB type SafeLink, SafePlus
    • Schneider Electric type FBX
  • for short-circuit indicator type SIGMA and ComPass

Riquired order data:

  • for 1 set you need 3 single-phase current sensors

more...
49-6025-000
Single-phase Current Sensor

  • for new installation on bushings
  • for switchgear manufacturer
    • Driescher type MINEX, MINEX C, G.I.S.E.L.A.
  • for short-circuit indicator type SIGMA and ComPass

more...
49-6025-xxx on request
Single-phase Current Sensor

  • for new installation on bushings
  • for switchgear manufacturer
    • Lucy Electric type AegisPlus
  • for short-circuit indicator type SIGMA and ComPass

more...
49-6025-601
Single-phase Current Sensor

  • for new installation on bushings
  • for switchgear manufacturer
    • ORMAZABAL type GA, GAE, GE
  • for short-circuit indicator type SIGMA and ComPass

more...
49-6025-311
Single-phase Current Sensor

  • for new installation on bushings
  • for switchgear manufacturer
    • Schneider Electric type FBX
  • for short-circuit indicator type SIGMA and ComPass

more...
49-6025-6xx on request
Single-phase Current Sensor

  • for new installation on bushings
  • incl. 3 Sensors, module carrier and rivets, completely mounted
  • for switchgear manufacturer
    • Siemens type 8DJH
  • for short-circuit indicator type SIGMA and ComPass

more...
49-6025-611
Single-phase Current Sensor

  • for new installation on bushings
  • incl. 3 Sensors, module carrier and bar
    spacers, completely mounted
  • for switchgear manufacturer
    • Siemens type 8DJH
  • for short-circuit indicator type SIGMA and ComPass

more...
49-6025-612
Earth Fault Current Sensor

  • Split-core summation sensor
  • for retrofit on insulated cables
  • for short-circuit indicator types SIGMA D+, ComPass B/BP
  • for Conductor-ø 150 mm
  • cable length 4 m

more...
49-6023-005
Earth Fault Current Sensor

  • Split-core summation sensor
  • for short-circuit indicator types SIGMA D+, ComPass B/BP
  • for retrofit on insulated cables
  • for Conductor-ø 220 - 250 mm
  • cable length 4 m

more...
49-6023-020

Wall-mounted Housings

Wall-mounted housing including earthing bar

  • 290 x 74 x 200 mm (W x H x D)

more...
V49-9001-007-001
Wall-mounted housing including earthing bar

  • 125 x 175 x 125 mm (W x H x D)

more...
V49-9001-004-001
Wall-mounted housing

  • 125 x 75 x 125 mm (W x H x D)

  • Bottom cable entry

more...
49-9001-001
Wall-mounted housing

  • 125 x 75 x 125 mm (W x H x D)

  • Rear cable entry

more...
49-9001-002

Other

Disassembly clip

Disassembly clip for retracting plug-in housings

more...
040401-0008
Spring clip

Spring clip suitable for 2 mm front plate thickness (standard)

more...
040804-0009
Spring clip

Spring clip suitable for 3 mm front plate thickness

more...
040804-0010

Dimensioned Drawings

back to overview

Contact

Watch list