Skip to content. | Skip to navigation

Personal tools

Sections

WEGA 1.2 C vario

WEGA 1.2 C is a 3-phase, maintenance-free voltage detecting system. It is partiular ideally suited for use with Horstmann fault directional indicators with adaptable voltage tap. A reduction of variants is realised due to pluggable capacitor cubes.

Integrated Voltage Detecting System

Product Features

  • Designed according to IEC 61243-5 (VDE 0682-415)
  • Wide-range WEGA (e. g. 10 – 20 / 24 kV):
    reduction of variants due to pluggable capacitor cube
  • Integrated maintenance test: maintenance-free
  • Overvoltage indication: phase-selective
  • Retrofit ready:
    Capacitive connection to ComPass B/BP/BS and SIGMA D/D+
  • LRM interface at the front: fully featured according to IEC 61243-5

WEGA 1.2 C vario is a 3-phase voltage detecting system, which indicates the following operating voltage states:

Voltage present
Threshold values for voltage presence indication: 0.1- 0.45 x Un.

Voltage present
Integrated maintenance test passed

Voltage present
Integrated maintenance test passed
Voltage signal too high (overvoltage indication)

No voltage present

The display test function on the front face of the WEGA 1.2 C vario allows to check all settings for conformity with the standards.
To ensure flexibility, an adjustable capacitor cube is plugged in on the back of the device allowing the use of various balancing capacitors. For connection, either shielded or unshielded cables with flat connectors or
system connectors can be used.
Optional: Mounting kit consisting of support frame with magnet on the back along with connection cable for HR interface for easy attachment on the front face of switchgear units.

Adjust WEGA 1.2 C vario

Required order data:

  • Switchgear type
  • Switchgear compartment
  • Operating voltage of the installation (Un)
  • Capacity of coupling electrode (C1)
  • Cable type and length of the connection cable

Product

Note Item Number

WEGA 1.2 C vario

Item Number51-1300-001


Technical Data

Technical Data

WEGA 1.2 C vario

Nominal frequency

50 – 60 Hz

Interface

3 LRM test sockets (one for each phase) and 1 earth socket

Indication

LCD display with arrow, dot and wrench too

Power supply

  • No auxiliary voltage needed
  • LCD display: fed by measuring voltage

Temperature range

-25 to +65 °C

Housing

Polycarbonate, IP54

Accessories

ORION 3.1

ORION 3.1

Equipment set:
ORION 3.1, plastic case, set of measuring lines, 2 HR/LRM-Adapter

more...
51-0206-101

ORION M1

ORION M1

Equipment set:

ORION, plastic case, set of measuring lines, 2 HR/LRM-Adapter, USB cable & CD with application program

more...
51-0206-201

SIGMA D

Display unit

more...
37-6000-001

SIGMA D+

Display unit

more...
37-6100-001

Dimensioned Drawings

back to overview

Contact

Watch list