Skip to content. | Skip to navigation

Personal tools

Sections

WEGA 2.2 C

WEGA 2.2 C is a 3-phase, maintenance-free voltage detecting system. It is particular ideally suited for use with Horstmann fault directional indicators with adaptable voltage tap. Additionally it has a zero voltage indication and 2 relay contacts for remote signal.

Integrated Voltage Detecting System

Product Features

  • Designed according to IEC 61243-5 (VDE 0682-415)
  • Remote: 2 relay contacts
  • Wide-range WEGA (e. g. 10 – 20 / 24 kV): reduction of variants
  • Integrated maintenance test: maintenance-free
  • Overvoltage indication: phase-selective
  • Retrofit ready:
    Capacitive connection to ComPass B/BS and SIGMA D/D+
  • LRM interface at the front: fully featured according to IEC 61243-5
  • Fully enclosed electronics: high functional reliability

WEGA 2.2 C is a 3-phase voltage detecting system, which indicates the following operating voltage states:

Voltage present
Threshold values for voltage presence indication: 0.1 – 0.45 x Un.

Voltage present
Integrated maintenance test passed

Voltage present
Integrated maintenance test passed
Voltage signal too high (overvoltage indication)

No voltage present

Additional to the LCD display the WEGA 2.2 C has 2 LEDs (green U=0 and red U≠0). Due to the built-in display test function at the front provides verification of the display of the installed  and de-energized unit.

For connection, either shielded or unshielded cables with flat connectors or system connectors can be used.

 

Required Order Data:

  • Switchgear type

  • Switchgear compartment

  • Operating voltage of the installation (Un)

  • Capacity of the coupling electrode (C1)

  • Cable type and length of the connection cable


Product

Note Item Number

WEGA 2.2 C

Item Number51-2250-001


Technical Data

Technical Data

WEGA 2.2 C

Nominal frequency

50 – 60 Hz

Interface

3 LRM measuring sockets (one per phase) and 1 earth socket
LRM system, 14 mm distance between sockets, with captive anti-dust cap

Indication

  • LCD display with arrow, dot and wrench tool
  • LED indication, U=0 and U≠0
Remote signal 2 relay contacts, alternating contact

Power supply

  • LCD display: fed by measuring voltage
  • Relay via 24 – 230 V AC / DC power supply

Temperature range

-25 to +65 °C

Housing material

Polycarbonate, IP54

 

Accessories

ORION 3.1

ORION 3.1

Equipment set:
ORION 3.1, plastic case, set of measuring lines, 2 HR/LRM-Adapter

more...
51-0206-101

ORION M1

ORION M1

Equipment set:

ORION, plastic case, set of measuring lines, 2 HR/LRM-Adapter, USB cable & CD with application program

more...
51-0206-201

SIGMA D

Display unit

more...
37-6000-001

SIGMA D+

Display unit

more...
37-6100-001

Dimensioned Drawings

back to overview

Contact

Watch list